">

Skip to end of banner Go to start of banner

Interior Overcut on V-Grooves: Configurations Screen

Skip to end of metadata

Created by dani.simmonds , last modified on Nov 15, 2024

Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Interior Overcut on V-Grooves

Contents:

If Interior Overcut on the V-Groove Inside cuts Too Long, Decrease the Interior Overcut on V-Grooves.
If Interior Overcut on the V-Groove Inside cuts Too Short, Increase the Interior Overcut on V-Grooves.

When Cutting From the Front: Note that you will be looking at the mat as it cut, so the images displayed here would be reversed when cutting from the front.

🛠️ Click the Minus [-] or Plus [+] button in the desired field several times, perform a test cut, and continue adjusting until satisfied.

Interior Overcut for V-Grooves

The V-Groove Interior Overcut adjusts the Blade’s Withdrawal (Overcut) from the Fallout (Interior).
- If the V-Groove Interior Overcut cuts Too Long, Decrease the V-Groove Interior Overcut.
- If the V-Groove Interior Overcut cuts Too Short, Increase the V-Groove Interior Overcut.

Full Definition: Interior Overcut for V-Grooves Definition

For Additional Information: Configuration Backup and Overcut Display: Cut Preview

No labels