Interior Overcut for V-Grooves

The Interior Overcut for V-Grooves controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove.

The Interior Cut is where the Blade Plunges/Retracts from the Fallout (not the Matboard).

• If Interior Overcut on the V-Groove Inside cuts Too Long, Decrease the Interior Overcut on V-Grooves.

• If Interior Overcut on the V-Groove Inside cuts Too Short, Increase the Interior Overcut on V-Grooves.