">

Click here to check out our new How To section">Click here to check out our new How To section

Skip to end of banner Go to start of banner

Opening Adjustment on Deboss: Configurations Screen

Skip to end of metadata

Created by dani.simmonds, last modified on Sept 30, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Opening Adjustment on Deboss

If the Deboss is Too Large, Decrease the Opening Adjustment.
If the Deboss is Too Small, Increase the Opening Adjustment.

Contents:

For Additional Information: See Troubleshooting Utility for information on adjusting the object’s size.

How to Select the Bevel Type to Edit

Select desired Cartridge Tab.

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

How to Adjust the Opening Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

No labels