Wizard AirGlide Advisements and Warnings

This machine comes with a data plate that contains the following information:

• CE Marking

• Name and address of manufacturer

• Phone number of manufacturer

• Designation of machine (Model)

• Serial number (includes year of manufacturing)

• Maximum Operating Pressure

• Width: 99” (2515mm)

• Height: 102” (2591mm)

• Depth: Standalone 49” (1245mm), Wall Mount 20” (508mm)

• Shipping Weight: 120 lbs.

• Packaging (box) Dimension: 95” (2413mm) L 34” (864mm) W 16” (406mm) H

• Corrugated Sign Panel up to 0.5”

• Aluminum Composite up to 3mm

• Acrylic up to 0.125”

• PVC up to 0.25”

• Polystyrene up to 0.5”

• Foamboard up to 0.5”

• Glass up to 0.25”

• NOTE: Both are included. Additional workspace is required for material input, as well as the front of the AirGlide for large material handling.

NOTE: This kit is not intended for direct mounting to masonry. Appropriate modifications should be made by a qualified contractor. Additional hardware will need to be supplied by the contractor.

• Please read and follow all advisements, instructions and warnings in the operation’s manual prior to operating the Wizard AirGlide.

• The Wizard AirGlide should only be operated by a person who is capable of identifying and acknowledging existing and predictable hazards during operation.

• PPE (Personal Protective Equipment) should be worn when operating the AirGlide.

• Before operating, the Wizard AirGlide must be mounted/standing with adequate workspace and lighting on a level and stable surface.

• Keep extremities clear of moving parts during operation.

• Proceed to the operations manual or contact the manufacturer for any questions concerning installation and operation of the Wizard AirGlide prior to use.

• Keep this manual accessible at all times for all operators of the Wizard AirGlide.

• Substrate not considered qualified material by the manufacturer should not be cut on the Wizard AirGlide or damage to the machine or operator could result.

• Contact the manufacturer with any questions regarding non-qualified material.
  Keep the bottom of the gantry and cutting head clear of obstructions to avoid cutting and crushing injuries.

• Keep the clamping area free of obstructions to avoid cutting and crushing injuries.

• Do not wear jewelry or loose hair or loose clothing when operating.

• Compressed air required, 2.5 SCFM (Standard Cubic Feet/Min) at 100 PSI – Air Source must have a water separator installed to eliminate condensation in the supply lines.