Click here to check out our new How To section

As Designed Cut Mode: Cutting Default Setting

Owned by dani.simmonds

Last updated: Sept 26, 2024

1 min read

As Designed Cut Mode: Cutting Default Setting

As Designed Cut Mode: Cutting Default Setting

Select As Designed for the Cut Mode to default to cutting the outside as originally designed.
- This can be helpful when coming from Trace or Nesting where the outside cut had been pre-determined.

Select As Designed for the Cut Mode to default to cutting the outside as it was originally designed.

For Additional Information:
See Cut Mode in the Set Advanced Options section on the Cut Preview.
See As Designed for the Cut Mode in the Set Advanced Options section on the Cut Preview.

Default Setting for Selecting Cutting Outside Cuts As Designed

As Designed Will Cut the Outside as They Were Originally Designed