/
Template Layer Blade Cartridge: Properties Tab

Template Layer Blade Cartridge: Properties Tab

  • Use the Blade Cartridge section to select the desired Blade Cartridge for the Template Layer.

  • Click on the Cartridge Icon. 

  • Select the desired Blade Cartridge for the current Layer of the selected Template.

  • NOTE: The 45°+ Cartridge and the 45° Front Cartridge are not selectable from this screen.

    • The 45°+ Cartridge is selected on the Cut Preview Screen by selecting a Blade Depth above 16.

    • The 45° Front Cartridge is selected on the Cut Preview Screen by selecting Options > Cut From Front Tool > Switch Between Front and Normal Tools and selecting to Cut From the Front of the mat.

 

Cartridge
Cartridges Available Only Under Specific Conditions
Select the Desired Blade Cartridge for the Current Layer

Related content

Blade Cartridge Type: How to Change the Blade Cartridge Type for an Opening
Blade Cartridge Type: How to Change the Blade Cartridge Type for an Opening
More like this
Selecting the 45 Degree Cartridge in the Editor
Selecting the 45 Degree Cartridge in the Editor
More like this
Selecting the 90 Degree Cartridge in the Editor
Selecting the 90 Degree Cartridge in the Editor
More like this
Selecting the 45 Degree Plus Cartridge in the Software by Selecting Thicker Matboard Depth: CMC Z1, Z (9000z) and 9000
Selecting the 45 Degree Plus Cartridge in the Software by Selecting Thicker Matboard Depth: CMC Z1, Z (9000z) and 9000
More like this