Explode CutArt

Explode CutArt

Explode CutArt
When a CutArt is placed, it is a single object. The individual elements cannot be moved separately until the CutArt is Exploded or brought into Trace to further edit. Exploding the CutArt will allow the unconnected portions to be moved separately; this will do nothing for a CutArt that is fully enclosed. For Additional information: Right-Click on the CutArt in the Design editor and select Explode CutArt. Select Explode CutArt on the Advanced tab in the Design editor. When a CutArt is placed, it is a single object. The individual elements cannot be moved separately until the CutArt is Exploded or brought into Trace to further edit. Explode the CutArt to move the separate elements of the CutArt individually. This CutArt has been Edited After Exploding See: CutArt Properties See: Trace The Trace utility is a Vector-Based drawing graphic program for editing/creating Vectors to either Cut or apply with a Non-Blade Tool on the CMC. Vector Design in Trace See: Vector Definition See: Trace Manual
Select the desired CutArt. Click Explode CutArt to break it up into the individual letters.

FrameShop 7x