This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Disengage Motors Button: FrameShop Cut Preview Screen
- dani.simmonds
Disengage Button | |
|---|---|
Use the Disengage button to cut the power to the motors of the cutting head. | |
Click the Disengage button to disengage power to the motors of the cutting Head on the CMC. User will be prompted to Click OK to release the motors. Grasp the Head and then Click OK. The motors will be disengaged and the Head will drop. When the motors are disengaged, the Head and the Gantry can be moved freely by hand. The head will need to be Aligned again before the next mat is cut. |  |