This FrameShop Online Help System is for an older Version of FrameShop.
The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw
If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.
What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ
FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw
Add V-Groove: FrameShop Design Editor
- dani.simmonds
Add V-Groove | |
|---|---|
Use the Add V-Groove button to add a V-Groove to the design. | |
Closed V-Groove A Closed V-Groove is a decorative channel that is cut about halfway through the thickness of the matboard, exposing the matboard core. |  |
Adding a V-Groove | |
|---|---|
Click the Add V-Groove button on the Openings tab to add a V-Groove to the design. |  |
If an object is selected when clicking Add V-Groove, the V-Groove Offset window will open. Enter the distance away from the current opening to place the V-Groove. | |
The V-Groove is placed. | |
Set the Default for the V-Groove Distance | |
|---|---|
The Default setting for the V-Groove Distance can be set in the Admin > Editor section. | |
Open V-Groove | |
|---|---|
An alternative to the Closed V-Groove is the Open V-Groove, which cuts a wide channel into the matboard and exposes the matboard beneath it. See V-Groove Properties for information on changing the VG Width on the Properties Tab to make a Closed V-Groove into an Open V-Groove. | |
Edit the V-Groove | |
|---|---|
Click on the V-Groove object and click on the Properties Tab to edit the V-Groove Properties. See V-Groove Properties for information on editing the individual proprietary adjustments available. | |