This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Disengage Button

Use the Disengage button to cut the power to the cutting head on the CMC.

Click the Disengage button to disengage power to the cutting Head on the CMC. 

User will be prompted to Click OK to release the motors.

Grasp the Head and then Click OK. 

The Head and Gantry on the CMC move freely when the motors are disengaged.

The head will need to be Aligned before the next mat is cut.

  • No labels