This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

45 Degree Plus Outside

The 45 Degree Plus Cartridge* cuts the outside with a 45° bevel on thicker matboard such as 8-ply. 

*Older systems may have a yellow plastic 45°+ Cartridge.

Select the 45 Degree Plus Outside Bevel Type

Select the 45°+ Tab on the Configurations screen. 

Select the specific Outside bevel type from the Current Bevel Type dropdown control.

  • Outside

  • Outside-Front of Mat

Select the Area of Concern for the Outside Cut Below:

Blade Depth is Incorrect When Using a SKU

Select this topic to adjust the Depth Bias.

Does Not Pause for Blade Change

Select this topic to adjust the Plunge Count.

Circle/Oval Rotation Button Utility

Select this topic to access the Circle/Oval Rotation Utility to adjust the oval rotation for different size ovals.

Exterior Backup is too Long 

Select this topic to adjust the Exterior Backup.

Exterior Backup is too Short 

Select this topic to adjust the Exterior Backup.

Exterior Overcut is too Long

Select this topic to adjust the Exterior Overcut.

Exterior Overcut is too Short

Select this topic to adjust the Exterior Overcut.

Interior Backup is too Long 

Select this topic to adjust the Interior Backup.

Interior Backup is too Short 

Select this topic to adjust the Interior Backup.

Interior Overcut is too Long 

Select this topic to adjust the Interior Overcut.

Interior Overcut is too Short 

Select this topic to adjust the Interior Overcut.

Outside Cuts the Wrong Size 

Select this topic to adjust the Opening Adjustment.

Outside has a Swoop 

Select this topic to adjust the Rotation.

Outside has a Flare 

Select this topic to adjust the Rotation.

Oval Outside has a Bump 

Select this topic to adjust the Oval Rotation.

Oval Outside has a Feather 

Select this topic to adjust the Oval Rotation.

Troubleshooting Button 

Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

  • No labels