This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Variable Pressure Optimization (VPO) Feature

The Variable Pressure Optimization (VPO) Feature allows the user to compensate for dense and extra dense matboard. Not all CMC models have this feature.

Adjusting the Air Pressure for Dense Matboard

Select this topic to see information on Adjusting the Air Pressure for Dense Matboard.

Adjusting the Air Pressure for Typical Matboard

Select this topic to see information on Adjusting the Air Pressure for Typical Matboard.

Cutting an Extra Dense Layer with the 90 Degree Cartridge

Select this topic to see information on Cutting an Extra Dense Layer with the 90 Degree Cartridge.

  • No labels