This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Layers Associated with SKUs

When you load a design containing SKUs, each SKU will be assigned to a layer. A maximum of six layers/SKUs is available. 

See Unable to Add One or More Design Layers for more information.

Layer Properties

Click on an individual opening to display the Layer Properties. 

The Layer Properties displays the distance from the Left, the distance from the Bottom of the mat, and the outside Width and Height of the design.

Group Layer Properties

Hold down the CTRL key and click on several openings to display the Group Layer Properties. 

The Group Layer Properties displays the distance from the Left, the distance from the Bottom of the mat.

  • No labels