">

Skip to end of banner Go to start of banner

V-Groove Cartridge Selection and Type: Properties Tab

Skip to end of metadata

Created by dani.simmonds , last modified on Jan 27, 2025

Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

V-Groove Cartridge Selection and Type: Properties Tab

Use the Cartridge Selection and Type section to select the desired Cartridge and Type for the V-Groove.
Selecting a Non-Blade Cartridge will change the V-Groove to that Cartridge type; i.e., changing it from a 45 Degree Cartridge to a Deboss will make it a Deboss opening.

Click on the Cartridge Icon.
Select the desired Cartridge for the current Layer.

Cartridge

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.
- Full Definition: Cartridge

Cartridges Available Only Under Specific Conditions

Some cartridges are available under specific circumstances, such as the 45°+ Cartridge, the 45° Front Cartridge, and the Non-Blade (Deboss/Pen/Vinyl/Crease) Cartridges.
- Full Definition: Cartridges Available Only Under Specific Conditions

When applicable, select the desired Cartridge Type from the Type dropdown control.

Selections available are dependent upon the Cartridge selected.

Non-Blade Tool Cartridge (Deboss/Pen/Vinyl/Crease)

The Non-Blade Tools are the Cartridges that perform an application function to the matboard without using a typical Blade and are accessed through the Add Decorative Line button or by editing a Non-Template object.

Full Definition: Non-Blade Tool Cartridge

No labels