Arc Design Details: Trace

Arc Design Details
Click on an Arc to see the specific details about it. Arc Tool Definition The Arc/wiki/spaces/FrameShop8x/pages/1942694083tool allows you to draw a three-point mathematically defined Arc in Trace. Full Definition: Arc Tool Definition
Design Details section displays information about the selected Arc.

Design Arc Details
Start X and Start Y Displays the Start X/Y Coordinates of the Arc's Start Point when drawn. If you clicked on the upper left and drew by dragging to the lower right, that would make the start point in the upper left corner. X and Y Position The X Position field is used to set or display the Horizontal position of the selected object. The Y Position field is used to set or display the Vertical position of the selected object. Full Definition: X and Y Position Definition
Mid X and Mid Y Displays the Mid point X and Y Coordinates.
End X and End Y Displays the End Point X and Y Coordinates.
Radius Displays the Radius of the selected Arc.
Length Displays the Length of the Arc in the current dimensions.
Bevel Type Displays the Bevel Type if the current object is Traced. Traced Tracing the Design provides the Bevel Type and other necessary information to the Vector design in order to either Cut or apply with a Non-Blade Tool on the CMC. The Set Bevels Tab in Trace contains the tools needed to Trace the design.
Layer Displays the Layer this object is assigned to if it is Traced.