">

Skip to end of banner Go to start of banner

Tool Line Too Far Left Horizontally

Skip to end of metadata

Created by dani.simmonds , last modified on Jan 14, 2025

Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Tool Line Too Far Left Horizontally

If Non-Blade line is applied Too Far Left Horizontally, Increase the Horizontal Adjustment.

Error rendering macro 'excerpt-include' : No link could be created for 'Horizontal Adjustment for Non-Blade Cartridges Definition'.

🛠️ Click the Minus [-] or Plus [+] button in the desired field several times, perform a test cut, and continue adjusting until satisfied.

No labels