Tool Line Too Far Left Horizontally

Tool Line Too Far Left Horizontally

If the Non-Blade Tool line is applied Too Far Left Horizontally, Increase the Horizontal Adjustment.

For Additional Information:
See Horizontal Adjustment for placement adjustment of the non-blade Tools.
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Horizontal Home on the Troubleshooting Utility to adjust the bladed cartridges.

The Horizontal Adjustment defines the global Horizontal placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Left Horizontally, Increase the Horizontal Adjustment.

If the Non-Blade Tool line is applied Too Far Right Horizontally, Decrease the Horizontal Adjustment.

Adjust the Horizontal Adjustment if the Object is Applied in the Wrong Place Horizontally

Horizontal Adjustment Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

FrameShop 7x