">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 15 Next »

Change to the Crease Cartridge

  • The Crease Cartridge is used to apply Crease marks that are used to assist in folding the thicker finished Box.

  • The Crease Cartridge is labeled in the software with a Perforation Symbol.

  • Make sure the Head and Footblock are already in the Aligned position.

  • Click the Align the Head button if necessary.           

  • Push blade cartridge release down to eject the current blade cartridge.

  • Turn Crease cartridge over and reinsert into the head with the notch on the back of the cartridge facing the head, until it clicks into place.

  • It can only be inserted one way.

  • No labels