Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 16
Next »
The 90° Bevel Opening is created by cutting a 90° Right Angle into the matboard. The matboard core is hidden from view since there is no Bevel when cutting at a 90° Right Angle. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.
|  |