Skip to end of metadata
Go to start of metadata
The 45° Front Cartridge cuts the bevel angle on the matboard from the front at 45°. This angle is displayed on the Front or the Back of the mat depending upon the selected Bevel Type. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. The Bevel Type determines the initial blade plunge position. The copper 45° Front Blade Cartridge is labeled “45°” with a Triangle Symbol on the end. The 45° Front Blade Cartridge is not selected within the Editor; it is set by setting Cut From Front on the Cut Preview.
Contents: |   |