">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 101 Next »

Oval Rotation on Oval V-Grooves

Contents:

  • If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

  • If the Outside cut of the Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation.

  • If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

  • If the Inside cut of the Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation.

🛠️ Click the Minus [-] or Plus [+] button in the desired field several times, perform a test cut, and continue adjusting until satisfied.

Feather in an Oval

  • A Feather is a Fringe of material where the cut starts and ends in an Oval Opening.

OvalBevelOpeningFeather70800.png

Full Definition: Feather in an Oval Definition

Bump in an Oval

  • A Bump is a Lump of material where the cut starts and ends in an Oval Opening.

OvalBevelOpeningBump70800.png

Full Definition: Bump in an Oval Definition

  • No labels