V-Groove Width for Open V-Groove: Properties Tab

Use the VG Width to set the V-Groove as a Closed V-Groove or an Open V-Groove.
An Open V-Groove has a VG Width larger than 0 (Zero) and cuts from the front or the back of the mat.

Normal Bevel Open V-Groove

The Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart, displaying both the matboard core from the front and the lower layer matboard surface.

Related Links
See Width Adjustment in the Configurations for information on adjusting the V-Groove if it is cutting too narrow or too wide.

Search