Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 24
Next »
The Fallout is the part of the mat that is removed when a design is cut. Typically, the Fallout is discarded, or saved for another project if large enough. Sometimes the Fallout is considered as part of the design, such as the Dropouts on the inner portions of LetterMat letters. The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut. Through Nesting, another design may be cut within the fallout.
|  |