">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 7 Next »

V-Groove Outside Cut has a Flare

🛠️ Click the Minus [-] or Plus [+] button in the desired field several times, perform a test cut, and continue adjusting until satisfied.

  • A Flare is where the corners Curve Away from the Opening on the V-Groove’s Exterior or Interior cut.

    • If the V-Groove’s Exterior has a Flare, Increase the Outside Rotation.

    • If the V-Groove’s Interior has a Flare, Decrease the Inside Rotation.

VGrooveExteriorInteriorFlareArrows70800.png

Full Definition: Flare on V-Groove Definition

VGrooveExteriorNoSwoopFlare70800.png
  • No labels