">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 56 Next »

Bevel Type Examples

  • The examples below display the different bevel types that can be cut with the bladed cartridges.

Normal Bevel Opening

  • The Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel away from the matboard surface.

    • The matboard core is visible from the front.

BevelOpening70800.png

Full Definition: Normal Bevel Opening Definition

Reverse Bevel Opening

  • The Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface.

    • The matboard core is not visible from the front.

NoBevelOpening70800.png

Full Definition: Reverse Bevel Opening Definition

Normal Bevel Drop

  • The Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel away from the fallout surface.

    • The matboard core is visible from the front.

BevelOutside70800.png

Full Definition: Normal Bevel Drop Definition

Reverse Bevel Drop

  • The Reverse Bevel Drop is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface.

    • The matboard core is not visible from the front.

NoBevelOutside70800.png

Full Definition: Reverse Bevel Drop Definition

Outside Bevel

  • The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface or simply cut at 90°.

    • The matboard core is not visible from the front.

NoBevelOutside70800.png

Full Definition: Outside Bevel Definition

Closed V-Groove

  • A Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement.

  • The matboard is sliced halfway through the thickness and the matboard core is visible from the front.

ClosedVGroove70800.png

Full Definition: Closed V-Groove Definition

Normal Bevel Open V-Groove

  • The 45° Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart.

  • Both the matboard core and the lower layer matboard surface are visible from the front.

  • The 45° Blade Cartridge does not support Blade Depths above 16.

45MetalOpenVGrooveCartridge70800.png

Full Definition: 45 Degree Normal Bevel Open V-Groove Definition

Reverse Bevel Open V-Groove

  • The Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart.

    • The matboard core is not visible but the lower layer matboard surface is visible from the front.

NoBevelOpenVGroove70800.png

Full Definition: Reverse Bevel Open V-Groove Definition

Cartridge Type Examples

  • No labels