You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 5 Current »
If the Outside cut of the Oval V-Groove has a Bump, Decrease the Outside Oval Rotation.
A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.
If the Oval cuts with a Bump, Increase the Oval Rotation.
Click the Plus or Minus button several times on the desired field, do a test cut and continue adjusting until satisfied.
For Additional Information:
Circle/Oval Rotation Utility: Configurations Screen
Troubleshooting Utility for the Configurations
Click the Plus or Minus button several times on the desired field, do a test cut and continue adjusting until satisfied.