">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Cutting from the Front Configurations

  • There is a separate bevel type configuration for cutting from the Front and cutting from the Back. 

  • Select the desired bevel type from the Front.

  • Configurations cut from the Front will display the bevel type name with a Front label; i.e., Normal Bevel - Front of Mat.

Error rendering macro 'excerpt-include' : No link could be created for 'Cut From Front Configurations Definition'.
 How to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels