You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 3 Next »
If the Outside cut of the Oval V-Groove has a Bump, Decrease the Outside Oval Rotation.
A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended.
If the Oval cuts with a Bump, Increase the Oval Rotation.
For Additional Information:
Circle/Oval Rotation Utility: Configurations Screen
Troubleshooting Utility for the Configurations
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
