">

Click here to check out our new How To section">Click here to check out our new How To section

Skip to end of banner Go to start of banner

No Speed Reduction: Cut Speeds Screen

Skip to end of metadata

Created by dani.simmonds, last modified on Sept 30, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

No Speed Reduction: Cut Speeds Screen

This is a feature of the VPO Head; not all CMC models have this feature.

Select No Automatic Speed Reduction for Depth of 16 and Above if you do not want the CMC to reduce speed when cutting thicker material.
Unselect No Automatic Speed Reduction for Depth of 16 and Above to let the CMC automatically reduce speed when cutting thicker material.
- NOTE: Depending upon the thickness and density of the matboard, you may get better cuts by slowing down the cuts.

For Additional Information:
See Variable Pressure Optimization (VPO) for more information.
See Adjusting the Air Pressure for Typical Matboard for more information.
See Adjusting the Air Pressure for Dense Matboard for more information.
See Adjusting the Air Pressure for Extra Dense Matboard with the 90° Cartridge for more information.

No labels