You are viewing an old version of this content. View the current version.
Compare with Current View Version History
Version 1 Next »
If the Outside cut of the V-Groove has a Flare, Increase the Outside Rotation.
For Additional Information: See Troubleshooting Utility for information on adjusting for a Swoop or Flare in a Non-Oval V-Groove.
A Flare on the Outside cut of the V-Groove is where the corners Curve Away from the V-Groove.
The Rotation on V-Grooves controls for Swoops or Flares on V-Grooves.
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
