Vertical Adjustment for Non-Blade Cartridges: Configurations Screen

If the Non-Blade Tool line is applied Too Far Up Vertically, Decrease the Vertical Adjustment.

For Additional Information:
See Vertical Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.
See Vertical Home which defines the global Vertical placement of objects cut with the Blade Cartridges.
See Vertical Home on the Troubleshooting Utility to adjust the bladed cartridges.

Vertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decrease the Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

How to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Click here to check out our new How To section">Click here to check out our new How To section