90 Degree Outside: Default Setting

Select 90 Degree Outside Cuts to default to cutting the outside with the 90° Cartridge.

Select 90 Degree Outside Cuts to default to cutting the outside with the 90° Cartridge.
Unselect 90 Degree Outside Cuts to default to cutting the outside with the 45° Cartridge.

For Additional Information:
See Cut Outside Using 90 Degree Tool under Set Advanced Options on the Cut Preview.
The user must still select the desired Outside Cut Options or Cut the Outside to cut the outside of the mat.

Outside Bevel Definition

The Outside Bevel is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 45 Degree Outside Configurations

See: 45 Degree Plus Outside Configurations

See: 45 Degree Front Outside Configurations

See: 52 Degree Outside Configurations

See: 90 Degree Outside Configurations

90 Degree Cartridge Definition

The 90° Cartridge cuts a 90° Right Angle into the matboard. The matboard core is not visible from the front. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 90 Degree Bevel Opening Definition

See: 90 Degree Bevel Drop Definition

See: 90 Degree Outside Definition

See: 90 Degree Bevel Open V-Groove Definition

Search

Click here to check out our new How To section">Click here to check out our new How To section

90 Degree Outside: Default Setting

90 Degree Outside: Default Setting