">

Click here to check out our new How To section">Click here to check out our new How To section

Skip to end of banner Go to start of banner

Tangent Threshold: Default Setting

Skip to end of metadata

Created by dani.simmonds on Sept 25, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Tangent Threshold: Default Setting

The Tangent Threshold is the number of degrees between arc segments before the Head will pick up and replunge.
For instance, if the Tangent Threshold is set to 6, anything larger than 6 degrees will cause the Head to pick up and replunge between segments.
The default is 6°.

Set the desired default Tangent Threshold.

For Additional Information:
See Tangify Tool in Trace for information on Tangifying Circuits.
See Edit>Tangify All Circuits in Trace for information on Tangifying All Circuits.
See Tangification Highlight in Trace for information on the Tangification Highlight Tool.

Tangent Threshold Definition

The Tangent Threshold will smooth the connection between the arc circuits that are below the specified Angle Degree in the Tangent Threshold field to provide a smoother cutting transition between the arcs.
The more tangent the connection between arcs, the smoother the cut.
Any arc connections above the specified Angle Degree in the Tangent Threshold field will cause the head to pick up and replunge.
6° is the standard setting.

No labels