">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Save as Path

  • It is suggested that as you work, save the design as a Path.

    • This will allow you to save the design as you go without being required to trace the design.

    • You can save the design and reload the Path file into Trace at a later time and continue on with the lesson.

    • Many of these lessons start with objects created in Design.

    • See the Design Editor for more information on placing and aligning objects, etc. 

 Path Definition

A Path (.wpx) is a drawn Vector graphic path in Trace which is defined by a Start and End point, which may contain other Points, Curves, and Angles.

The Paths are independent of resolution, which means they can be resized without losing detail.

The Path file format in Trace will save all of the Vector elements of the design as you work, whether it is Traced or not. 

When the design is completed, save it as a CutArt to load into Designer.

  • No labels