">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

How to Make an Open V-Groove

  • This will show you how to edit the V-Groove and change it from a Closed V-Groove to an Open V-Groove.

OpenVGDone800.png

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • On the Openings Tab, click the Add V-Groove button to place the V-Groove onto the Editor.

    • If you have an object selected, the V-Groove Offset screen will open.

    • Enter the Distance to place the V-Groove and click OK.

  • Click on the Properties Tab to edit it.

  • Enter the desired size for the V-Groove.

VGShapeSize800.png

  • On the VG Width field, enter any Value above Zero(0).

    • Any value over Zero (0) is an Open V-Groove.

    • The value of Zero (0) is a Closed V-Groove.

OpenVGVGWidth800.png

  • The Open V-Groove is now complete.

  • For Additional Information See: V-Groove Shape for instructions on changing the V-Groove to a different template Shape.

OpenVGDone800.png
  • No labels