These instructions will show you how to edit the standard Closed V-Groove and change it into an Open V-Groove.
Click New Mat Design on the FrameShop Main Page.
Click Cancel on the New Openings Screen.
On the Openings Tab, click the Add V-Groove button to place the V-Groove onto the Editor.
If you have an object selected, the V-Groove Offset screen will open.
Enter the Distance to place the V-Groove and click OK.
Click on the Properties Tab to edit it.
Enter the desired size for the V-Groove.
On the VG Width field, enter any Value above Zero(0).
Any value over Zero (0) is an Open V-Groove.
The value of Zero (0) is a Closed V-Groove.
