">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

How to Make the CutArt Drops Cut on Another Layer

  • CutArt™ are simple shapes and design elements created by Wizard that can be added to designs.

    CutArts can be applied to your current design and edited, such as resizing and rotating.

    They can be Cut, Debossed, Penned or cut on Vinyl.

  • NOTE: Make sure that the CutArt you want to use contains Drops, otherwise, nothing will happen.

  • The CutArt can be Penned and Debossed much smaller than it can be cut.

 LetterMat Definition

The LetterMat™ fonts are specialized fonts designed specifically for the Wizard FrameShop software.

Single Line Fonts: The letters are formed with Single Lines, not drawn as the outlines of shapes. Single line fonts can only be Debossed or drawn with the Pen.

Outline Fonts: The Outline fonts display the shapes of the letters as outlines with only a slight distinction between the thin and thick strokes. These fonts can be Debossed, Penned or Cut.

See: Add Font Function

See: LetterMat Properties

 TTF Definition

The True Type Font (TTF) is an additional source of fonts, separate from LetterMats, that can be loaded into Designer to Cut, Deboss, or Pen.

The True Type Font (TTF) format was created to work between both Apple (Mac) and Microsoft (Windows) and could be deciphered by most printers by default. The TTFs contain the mathematical outlines of each character in the font.

The True Type Fonts are located in the /Windows/Fonts directory.

Note: TTFs have not been tested by Wizard and results may vary. Feel free to experiment.

See: Add Font Function

See: TTF Properties

2LayerLetterMat2LayersTypeDone800.png

  • Click New Mat Design on the FrameShop Main Page.

  • Click Cancel on the New Openings Screen.

  • Click the Add Font Button on the Openings tab.

  • Select the desired LetterMat/TTF font from the pullout list.

2LayerLetterMatStart800.png

  • The LetterMat/TTF placeholder is placed on the Editor.

  • Click on Properties to edit the LetterMat/TTF Properties.

  • Enter the desired text for the LetterMat/TTF in the Text field.

2LayerLetterMatText800.png

  • Under Type select Two Layers.

  • This makes the LetterMat/TTF two layers, where the letter drops will cut on a lower layer.

2LayerLetterMatProperties2Layers800.png

  • Finish the design as desired.

2LayerLetterMat2LayersTypeDone800.png
  • No labels