Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Current »

Cutting Composite Materials

  • Rotate the silver Material Stop up so that the gold colored Composite Material Stop can be used.

  • The Composite Material Stop is offset to compensate for the position of the Composite Cartridge.

  • Place the material to be cut onto the AirGlide, aligning it to the Composite Material Stop.

  • Turn the speed toggle to fast.

  • Engage clamp.

  • Pull the Cut lever down to cut the material.

  • Release clamp.

  • Remove the material.

  • Push the cut lever up to return trolley to the top of the gantry.

  • No labels