How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 33 Next »

Opening Adjustment

  • The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

Contents:

 Opening Adjustment for Openings Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Opening is cut Too Large, Decrease the Opening Adjustment.

If the Opening is cut Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Openings Configurations

 Opening Adjustment on Drops Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Drop is cut Too Large, Decrease the Opening Adjustment.

If the Drop is cut Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Drops Configurations

 Opening Adjustment for Outsides Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Outside is cut Too Large, Decrease the Opening Adjustment.

If the Outside is cut Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Outsides Configurations

 Opening Adjustment on V-Grooves Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the V-Groove is cut Too Large, Decrease the Opening Adjustment.

If the V-Groove is cut Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for V-Grooves Configurations

 Opening Adjustment for Deboss Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Deboss is Too Large, Decrease the Opening Adjustment.

If the Deboss is Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Deboss Configurations

 Opening Adjustment for Pens Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Pen is Too Large, Decrease the Opening Adjustment.

If the Pen is Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Pens Configurations

 Opening Adjustment for Vinyl Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Vinyl is cut Too Large, Decrease the Opening Adjustment.

If the Vinyl is cut Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Vinyl Configurations

 Opening Adjustment for Crease Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the Crease is Too Large, Decrease the Opening Adjustment.

If the Crease is Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for Creases Configurations

 How to Adjust the Opening Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • No labels