">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 70 Next »

Inside Rotation on V-Grooves

  • If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

  • If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

Cutting Direction of V-Grooves

  • First Cut: Cuts the Interior cut into the Fallout Clockwise.

  • Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

V-Groove Inside has a Swoop

  • If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

 Inside V-Groove Swoop Definition

A Swoop on the Inside cut of the V-Groove is where the corners Curve Inward toward the V-Groove.

If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

The Inside Rotation on V-Grooves controls for Swoops or Flares on V-Grooves.

 How to Adjust the Inside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

V-Groove Inside has a Flare

  • If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

 Inside V-Groove Flare Definition

A Flare on the Inside cut of the V-Groove is where the corners Curve Away from the V-Groove.

If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

The Rotation on V-Grooves controls for Swoops or Flares on V-Grooves.

 How to Adjust the Inside Rotation

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Troubleshooting Utility for V-Grooves

  • If the Inside cut of the V-Groove has a Swoop, Increase the Inside Rotation.

  • If the Inside cut of the V-Groove has a Flare, Decrease the Inside Rotation.

  • Use the Troubleshooting Configurations to fine-tune for Swoops/Flares in a V-Groove.

    • Select which part of the V-Groove to be edited: Inside or Outside or Both.

 Inside Rotation on V-Grooves Definition

The Inside Rotation on V-Grooves controls for /wiki/spaces/FrameShop8x/pages/1942514109 and /wiki/spaces/FrameShop8x/pages/1942511191 in the inside cut of the V-Grooves.

  • No labels