Trace Menu Selections

Load: Load a project file. 

Save As: Save the design under a different name or file format.

Clear All: Clear both the Design and the Image from the editor.

Clear Design: Clear the Design from the editor.

Clear Image: Clear the Image from the editor.

Send to CMC: Send the design to the Cutting Preview Screen to cut.

Exit: Exit to the FrameShop main screen.

Convert Arcs to Splines: Convert the Arcs into Bezier Splines.

Break All Intersections: Break all segments where they intersect with other segments.

Tangify all Circuits: Smooth the connection between circuits where the conjunction is below a certain angle. 

Auto Join Segments: Automatically join segments together.

Explode All: Break objects down into their individual segments.

Flip Design: Flip the entire design vertically or horizontally.

Add Tape Measure: Add a Tape Measure to the editor.

Cut (Ctrl+X): Cut the current selection from the editor.

Copy (Ctrl+C): Make a copy of the selected object.

Paste (Ctrl+V): Paste the current selection onto the editor.

Select All (Ctrl+A): Select all of the objects on the editor.

Select None (Ctrl+N): Unselect all of the objects on the editor.

Undo (Ctrl+Z): Undo the last command.

Redo: Redo the last command.

Continuous Drawing: Continue drawing without having to restart the current drawing tool command.

Auto Align Circuits: Display alignment lines when the cursor lines up with control points of another object. 

Show Control Points: Display the beginning, middle and end control points of objects.

Show Start Points: Show the initial blade plunge and cut direction of each traced object. 

Show Cut Order Numbers: Display the cut order of traced objects. 

Show Rulers: Display rulers along the border edges.

Trace Manual: Opens this on-line manual.