Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

The 90° Blade Holder Footblock is located on the left and the 45°+ Blade Holder Footblock is located on the right.

Replacing the Left 90° Cartridge Footblock

  • Use the Footblock Tool to remove the current 90° Cartridge Footblock.

  • Use the Footblock Tool to remove the current 90° Cartridge Footblock, turning it counter-clockwise half a turn to loosen it.

  • Pull the current 90° Cartridge Footblock tool out from the Trolley.

  • Place the new 90° Cartridge Footblock tool into the Trolley.

  • Use the Footblock Tool to secure the current 90° Cartridge Footblock into place, turning it clockwise half a turn to tighten it. The tool is now ready to be used.

Replacing the Right 45°+ Cartridge Footblock

  • Use the Footblock Tool to remove the current 45°+ Cartridge Footblock.

  • Use the Footblock Tool to remove the current 45°+ Cartridge Footblock, turning it counter-clockwise half a turn to loosen it.

  • Remove the current 45°+ Cartridge Footblock from the Trolley.

  • Place the new 45°+ Cartridge Footblock into the Trolley.

  • Use the Footblock Tool to secure the current Cartridge Footblock into place, turning it clockwise half a turn to tighten it. The tool is now ready to be used.

  • No labels