">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 25 Next »

90 Degree Cartridge Configurations

  • The 90 Degree Cartridge cuts into the matboard at 90° and leaves no bevel. 

 Cartridge Definition

A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.

Select the 90 Degree Cartridge Bevel Type

  • Select the 90° Cartridge tab.

  • Select the desired Bevel Type from the Current Bevel Type dropdown control.

  • Select the cut type from the list below.

 Bevel Type Definition

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

90 Degree Opening Configurations

The 90 Degree Opening includes the following bevel types:

  • Normal Bevel

  • Normal Bevel-Front of Mat

90 Degree Drop Configurations

The 90 Degree Drop includes the following bevel types:

  • Normal Drop

  • Normal Drop-Front of Mat

90 Degree Outside Configurations

The 90 Degree Outside includes the following bevel types:

  • Outside

  • Outside-Front of Mat

Troubleshooting Button

Select this topic to see information on the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview.

 Troubleshooting Button Definition

The Troubleshooting Utility allows you to bring in a single opening and automatically selects the correct Cartridge tab and Bevel Type to configure.

  • No labels