This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 7 Next »

Outside Cut Options

Use the Outside Cut Options dropdown control to select how the outside of the mat is cut on the CMC Z1 and 9000z.

Outside Cut Options CMC Z1

Select this topic to see information on the Outside Cut Options on the Z1.

Outside Cut Options CMC 9000z

Select this topic to see information on the Outside Cut Options on the 9000z.

Outside Cut Options CMC 9000

Select this topic to see information on the Outside Cut Options on the 9000.

Outside Cut Options CMC 8000

Select this topic to see information on the Outside Cut Options on the 8000.

  • No labels