">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Edit Menu

The Edit menu contains a variety of commands that can be used to edit the design on the editor.

Convert Arcs to Splines 

Select this topic to see information on Converting Arcs to Bezier Splines.

Break All Intersections 

Select this topic to see information on Breaking All Segments at their Intersections where they intersect with other segments.

Tangify all Circuits 

Select this topic to see information on Tangifing all of the Circuits to smooth the connection between circuits where the conjunction is below a certain angle.

Auto Join Segments 

Select this topic to see information on Automatically Joining Segments together.

Explode All 

Select this topic to see information on breaking objects by Exploding them All down into their individual segments.

Flip Design 

Select this topic to see information on Flipping the Entire Design vertically or horizontally.

Add Tape Measure 

Select this topic to see information on Adding a Tape Measure to the editor.

Cut - Ctrl+X 

Select this topic to see information on Cutting the current selection from the editor.

Copy - Ctrl+C 

Select this topic to see information on making a Copy of the selected objects.

Paste - Ctrl+V 

Select this topic to see information on Pasting the currently Copied selection onto the editor.

Select All - Ctrl+A  

Select this topic to see information on Selecting All of the objects on the editor.

Select None - Ctrl+N  

Select this topic to see information on Selecting None of the objects on the editor.

Undo - Ctrl+Z 

Select this topic to see information on Undoing the last command.

Redo 

Select this topic to see information on Redoing the last command.

  • No labels