How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 51 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Rotation on V-Grooves Definition

Adjusting the V-Groove Rotation

  • To adjust, click plus/minus on the desired field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

 Outside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

 Outside Swoop Definition

A Swoop in the Outside Cut of a Non-Oval V-Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove.

 Outside Flare Definition

A Flare in the Outside Cut of a Non-Oval V-Groove is where the corners Curve Away from the opening on the Outside Cut of the V-Groove.

V-Groove Cutting Direction

First Cut of V-Groove:

  • Cuts the Interior V-Groove Line.

  • Cuts into fallout, not the matboard.

  • Cuts clockwise.

  • This uses the Inside Rotation.

Second Cut of V-Groove:

  • Cuts the Exterior V-Groove Line.

  • Cuts into matboard, not the fallout.

  • Cuts counter-clockwise.

  • This uses the Outside Rotation.

V-Groove Outside has a Swoop

Problem:

  • The Outside cut of the Non-Oval V-Groove has Swoops.

Resolution:

  • If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

 Outside Swoop Definition

A Swoop in the Outside Cut of a Non-Oval V-Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove.

V-Groove Outside has a Flare

Problem:

  • The Outside cut of the Non-Oval V-Groove has Flares.

Resolution:

  • If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

 Outside Flare Definition

A Flare in the Outside Cut of a Non-Oval V-Groove is where the corners Curve Away from the opening on the Outside Cut of the V-Groove.

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

  • The Outside Non-Oval V-Groove cuts with a Swoop or Flare.

Resolution:

 Outside Rotation for V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside Cut of the Non-Oval V-Grooves.

 Outside Swoop Definition

A Swoop in the Outside Cut of a Non-Oval V-Groove is where the corners Curve Inward toward the opening on the Outside Cut of the V-Groove.

 Outside Flare Definition

A Flare in the Outside Cut of a Non-Oval V-Groove is where the corners Curve Away from the opening on the Outside Cut of the V-Groove.

  • No labels