How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 42 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Rotation on V-Grooves Definition

The Outside Rotation controls for Swoops or Flares on the outside cut on non-oval V-Grooves.

First Cut of V-Groove:

  • Cuts the Interior V-Groove Line.

  • Cuts into fallout, not the matboard.

  • Cuts clockwise.

  • This uses the Inside Rotation.

Second Cut of V-Groove:

  • Cuts the Exterior V-Groove Line.

  • Cuts into matboard, not the fallout.

  • Cuts counter-clockwise.

  • This uses the Outside Rotation.

V-Groove Outside has a Swoop

Problem:

  • The Outside cut of the non-oval V-Groove has Swoops.

Resolution:

  • Decrease the Outside Rotation.

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

V-Groove Outside has a Flare

Problem:

  • The Outside cut of the non-oval V-Groove has Flares.

Resolution:

  • Increase the Outside Rotation. 

  • To adjust, click plus/minus on the field about five times.

  • Click OK and do another test cut.

  • Continue making adjustments until the desired outcome is achieved.

See Also: Troubleshooting Utility for Non-Oval V-Grooves

Problem:

  • The Non-Oval V-Groove cuts with a Swoop/Flare.

Resolution:

  • No labels