Feather on an Oval V-Groove
The Outside Oval Rotation for V-Grooves controls for Feathers or Bumps on the Outside Cut of an Oval V-Groove. A Feather in the Outside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove. If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation. Feather on the Outside Cut of the Oval V-Groove Outside Oval Rotation for V-Grooves The Inside Oval Rotation for V-Grooves controls for Feathers or Bumps on the Inside Cut of an Oval V-Groove. A Feather in the Inside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Inside Cut of the Oval V-Groove. If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation. When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved.
|