Sliding Sleeves | |
|---|---|
This box consists of two pieces of board that fold around the object and then tuck into itself to create the box. The base and lid can be cut separately. | |
Cut out the lid and the base of the box at the desired dimension. |  |
Fold the lid and the base sections along the creased edges. |  |
Place the base perpendicular to the lid at the fourth square from the end and secure with hot glue. |  |
Fold in the flap at the opposite end of the lid. |  |
Fold over the flap at the opposite end of the lid. |  |
Fold over the flap at the opposite end of the lid so that it is flat. |  |
Bring in the two sides of the box over the edges of the lid. |  |
Fold the remaining flap of the lid over the box. |  |
Tuck the remaining flap of the lid into the box. |  |
The box is assembled. |  |