This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Show Control Points On

Select Options > Show Control Points to display the beginning, middle and end Control Points of objects. 

Showing Control Points On

Select Options > Show Control Points. 

Click on the Edit radio button and click on the desired object to select it.

The Control Points are displayed.

  • The blue dots* display the beginning and end points.

  • The green dots* display center points.

*Dots are displayed exaggerated here for display.

If you unselect the object, the Control Points are displayed, but they are muted and are not as easy to see. 

*Dots are displayed exaggerated here for display.

Show Control Points Off

Select Options > Unclick Show Control Points to not display any Control Points. This can be useful if you want to see what the design looks like without any distractions.

Showing Control Points Off

Select Options > Unclick Show Control Points. 

Click on the Edit radio button and click on the desired object to select it. 

No Control Points will be displayed.

  • No labels